Torsion Springs

Torsion springs are available in a variety of materials, the most common being carbon steel or stainless steel, depending on the environment into which the springs are entering. Both torsion and double torsion springs are made to achieve the best possible results with a variety of leg positions and tips depending upon application. Wire size for torsion springs ranges from 0.25 mm (0.010″) up to 19 mm (0.750″). Wire size for double torsion’s ranges from 0.25 mm (0.010″) up to 6 mm (0.236″). We have facilities for both hand-made and automated spring manufacture and can be left or right handed depending on application.

Torsion Spring Cycle Rack

Typical uses for torsion springs include making it easier to open and close hatches and doors. If you’ve got a paper hole punch on your desk chances are it contains a torsion spring to spring it back open. Garage doors often rely upon torsion springs to help them open and close.
Smaller examples include trays for CD’s & DVD’s which often rely upon torsion springs to work.
Here at Davies Springs we do not just talk about springs but we actually have the machinery and expertise to manufacture and therefore we can create a wide variety of solutions.


Typical end customers: –

  • Engineering companies
  • Classic vehicle / motorbike restoration
  • Defence industry
  • Drink dispensers / vending machines
  • Pleasure boat industry

Why use Davies Springs?

Davies Springs supply a wide range of customers from stockists to end manufacturers. From basic springs to more complex designs we are equipped to meet your needs.

Please call 01527 500 710.

Out of hours please use our contact form and we will call you back.

    Materials For Making Springs Wire Forms & Pins

    Here at Davies Springs we are constantly meeting the challenge of working with new materials as well as the standard options, this is a complex subject and the simple answer is please talk to us and we can advise on the various solutions: –


    • · Stainless steel (302, 316, 17/7 or 18/8)
    • · Carbon Steel / Music Wire
    • · Piano Wire

    Exotic Spring Making Materials

    Exotic materials are another possibility because of their unique chemistry, again the best answer is please contact Davies Springs to discuss your needs – even some of our long standing customers are unaware of the options which are available: –

    • · Inconel 600, 601, 625, 718, X750
    • · Nimonic 90
    • · Monel 400
    • · Oil Tempered Wires
    • · Phosphor Bronze
    • · Hastelloy B-2, B-3, C-4, C-22, C-276, C-2000, G-30, ‘X’
    • · Duratherm 600
    • · Phynox aka Eligloy
    • · MP35N

    Oil Tempered Wire –
    BS2803 Pre-hardened Carbon

    • · Chrome vanadium BS2803 CrVd pre hardened alloy
    • · Silicon chrome – BS 2803 SiCr Pre hardened alloy

    If you cannot see what you are looking for, it maybe no more than we have not included it on the above list, please do call on 01527 500 710.